|
|
TOYOTA IS RECALLING 90,189 MY 2008 HIGHLANDER AND HIGHLANDER HYBRID PASSENGER VEHICLES EQUIPPED WITH A THIRD ROW SEAT. THESE VEHICLES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, "OCCUPANT CRASH PROTECTION." THE NON-DRIVER DESIGNATED SEATING POSITIONS (DSP) ON THESE VEHICLES IS EQUIPPED WITH SEAT BELT ASSEMBLIES THAT HAVE A FEATURE THAT CONVERTS THE RETRACTOR FROM AN EMERGENCY LOCKING RETRACTOR (ELR) TO AN AUTOMATIC LOCKING RETRACTOR (ALR). THE BELTS CONVERT TO THE ALR MODE AFTER THE WEBBING HAS BEEN FULLY WITHDRAWN FROM THE RETRACTOR. THE SYSTEM IS DESIGNED SO THAT AS THE BELT IS RELEASED INTO THE RETRACTOR, THE SYSTEM REMAINS IN THE ALR MODE SO THAT A CHILD RESTRAINT SYSTEM (CRS) CAN BE TIGHTLY SECURED. ...more details
| Recall Reason |
SEAT BELTS:REAR |
| Recall Date |
APR 18, 2008 |
| Model Affected |
HIGHLANDER |
| Potential Units Affected |
90189 |
|
Recall Summary
TOYOTA IS RECALLING 90,189 MY 2008 HIGHLANDER AND HIGHLANDER HYBRID PASSENGER VEHICLES EQUIPPED WITH A THIRD ROW SEAT. THESE VEHICLES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, "OCCUPANT CRASH PROTECTION." THE NON-DRIVER DESIGNATED SEATING POSITIONS (DSP) ON THESE VEHICLES IS EQUIPPED WITH SEAT BELT ASSEMBLIES THAT HAVE A FEATURE THAT CONVERTS THE RETRACTOR FROM AN EMERGENCY LOCKING RETRACTOR (ELR) TO AN AUTOMATIC LOCKING RETRACTOR (ALR). THE BELTS CONVERT TO THE ALR MODE AFTER THE WEBBING HAS BEEN FULLY WITHDRAWN FROM THE RETRACTOR. THE SYSTEM IS DESIGNED SO THAT AS THE BELT IS RELEASED INTO THE RETRACTOR, THE SYSTEM REMAINS IN THE ALR MODE SO THAT A CHILD RESTRAINT SYSTEM (CRS) CAN BE TIGHTLY SECURED.
|
|
Consequence
HOWEVER, FOR THE TWO THIRD ROW DSP'S ON THESE VEHICLES, THE ALR MODE DEACTIVATES BEFORE THE WEBBING IS FULLY RETRACTED, SO THAT IT WILL NOT LOCK WHEN CERTAIN REAR-FACING CRS'S THAT HAVE A SHORT SEAT BELT ROUTING PATH ARE INSTALLED IN THE VEHICLE. THIS CAN ALLOW THE SEAT BELT WEBBING TO SPOOL OUT DURING NORMAL DRIVING MANEUVERS, WHICH COULD AFFECT THE STABILITY OF A CHILD RESTRAINT INSTALLED AT THOSE SEATING POSITIONS. AS SUCH, THIS COULD DISCOURAGE THE USE OF A CHILD RESTRAINT AND IN THE EVENT OF A CRASH, THE CHILD MAY NOT BE ADEQUATELY PROTECTED POSSIBLY RESULTING IN INJURY.
|
|
Remedy
DEALERS WILL INSTALL A NEWLY DESIGNED SEAT BELT COMPONENT FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN ON OR ABOUT DECEMBER 18, 2008. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331.
|
|
Notes
TOYOTA MOTOR NORTH AMERICA, INC. 80D
|
TOYOTA IS RECALLING 39,100 STAINLESS STEEL EXHAUST TIPS SOLD BY TOYOTA AS AN OPTIONAL ACCESSORY FOR USE ON MY 2008 HIGHLANDER AND HIGHLANDER HYBIRD VEHICLES. DUE TO IMPROPER HEAT TREATMENT DURING THE MANUFACTURING PROCESS, THE ORIGINAL CLAMP USED TO SECURE THE TOYOTA STAINLESS STEEL EXHAUST TIP TO THE EXHAUST PIPE MAY DEVELOP MICROSCOPIC CRACKS. EVENTUALLY THE CRACK MAY EXPAND CAUSING THE CLAMP TO BREAK. ...more details
| Recall Reason |
EQUIPMENT |
| Recall Date |
APR 27, 2009 |
| Model Affected |
HIGHLANDER |
| Potential Units Affected |
39100 |
|
Recall Summary
TOYOTA IS RECALLING 39,100 STAINLESS STEEL EXHAUST TIPS SOLD BY TOYOTA AS AN OPTIONAL ACCESSORY FOR USE ON MY 2008 HIGHLANDER AND HIGHLANDER HYBIRD VEHICLES. DUE TO IMPROPER HEAT TREATMENT DURING THE MANUFACTURING PROCESS, THE ORIGINAL CLAMP USED TO SECURE THE TOYOTA STAINLESS STEEL EXHAUST TIP TO THE EXHAUST PIPE MAY DEVELOP MICROSCOPIC CRACKS. EVENTUALLY THE CRACK MAY EXPAND CAUSING THE CLAMP TO BREAK.
|
|
Consequence
THE ORIGINAL CLAMP AND THE TOYOTA STAINLESS STEEL EXHAUST TIP MAY FALL OFF THE VEHICLE¿S EXHAUST PIPE AND BECOME A ROAD HAZARD WHICH WOULD INCREASE THE RISK OF A VEHICLE CRASH.
|
|
Remedy
TOYOTA WILL NOTIFY OWNERS AND REPLACE THE CLAMP FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 4, 2009. OWNERS MAY CONTACT TOYOTA CUSTOMER EXPERIENCE CENTER AT 1 888-270-9371 MONDAY THROUGH FRIDAY, 5:00 AM TO 6:00 PM, SATURDAY 7:00 AM THROUGH 4:00 PM PACIFIC TIME.
|
|
Notes
TOYOTA MOTOR NORTH AMERICA, INC. SSC 90E
|
SOUTHEAST TOYOTA IS RECALLING 3,499 STAINLESS STEEL EXHAUST TIPS SOLD BY SOUTHEAST TOYOTA AS AN OPTIONAL ACCESSORY FOR USE ON MY 2008 HIGHLANDER AND HIGHLANDER HYBIRD VEHICLES. DUE TO IMPROPER HEAT TREATMENT DURING THE MANUFACTURING PROCESS, THE ORIGINAL CLAMP USED TO SECURE THE STAINLESS STEEL EXHAUST TIP TO THE EXHAUST PIPE MAY DEVELOP MICROSCOPIC CRACKS. EVENTUALLY THE CRACK MAY EXPAND CAUSING THE CLAMP TO BREAK. ...more details
| Recall Reason |
EQUIPMENT |
| Recall Date |
MAY 14, 2009 |
| Model Affected |
HIGHLANDER |
| Potential Units Affected |
3499 |
|
Recall Summary
SOUTHEAST TOYOTA IS RECALLING 3,499 STAINLESS STEEL EXHAUST TIPS SOLD BY SOUTHEAST TOYOTA AS AN OPTIONAL ACCESSORY FOR USE ON MY 2008 HIGHLANDER AND HIGHLANDER HYBIRD VEHICLES. DUE TO IMPROPER HEAT TREATMENT DURING THE MANUFACTURING PROCESS, THE ORIGINAL CLAMP USED TO SECURE THE STAINLESS STEEL EXHAUST TIP TO THE EXHAUST PIPE MAY DEVELOP MICROSCOPIC CRACKS. EVENTUALLY THE CRACK MAY EXPAND CAUSING THE CLAMP TO BREAK.
|
|
Consequence
THE ORIGINAL CLAMP AND THE TOYOTA STAINLESS STEEL EXHAUST TIP MAY FALL OFF THE VEHICLE'S EXHAUST PIPE AND BECOME A ROAD HAZARD WHICH WOULD INCREASE THE RISK OF A VEHICLE CRASH.
|
|
Remedy
SOUTHEAST TOYOTA WILL NOTIFY OWNERS AND REPLACE THE CLAMP FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING MAY/JUNE 2009. OWNERS MAY CONTACT SOUTHEAST TOYOTA CUSTOMER LOYALTY DEPARTMENT AT 1-800-301-6859.
|
|
Notes
SOUTHEAST TOYOTA DISTRIBUTORS, LLC
|
TOYOTA IS RECALLING 27,080 MODEL YEAR 2009 AND 2010 PASSENGER CARS BUILT FROM JUNE 2, 2008 TO MAY 4, 2009. THESE VEHICLES WERE NOT EQUIPPED WITH LOAD CARRYING CAPACITY MODIFICATION LABELS WHICH FAILS TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." ...more details
| Recall Reason |
EQUIPMENT:OTHER:LABELS |
| Recall Date |
JUN 15, 2009 |
| Model Affected |
HIGHLANDER |
| Potential Units Affected |
27080 |
|
Recall Summary
TOYOTA IS RECALLING 27,080 MODEL YEAR 2009 AND 2010 PASSENGER CARS BUILT FROM JUNE 2, 2008 TO MAY 4, 2009. THESE VEHICLES WERE NOT EQUIPPED WITH LOAD CARRYING CAPACITY MODIFICATION LABELS WHICH FAILS TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS."
|
|
Consequence
INCORRECT LOAD CARRYING CAPACITY MODIFICATION LABELS COULD RESULT IN THE VEHICLE BEING OVERLOADED, INCREASING THE RISK OF A CRASH.
|
|
Remedy
TOYOTA WILL NOTIFY OWNERS AND PROVIDE THEM WITH A NEW, ACCURATE LABEL TO BE INSTALLED OVER THE INACCURATE LABEL FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR ABOUT AUGUST 31, 2009. OWNERS MAY CONTACT TOYOTA AT 1-888-270-9371.
|
|
Notes
TOYOTA MOTOR NORTH AMERICA, INC.
|
|