|
|
CERTAIN CK MOTORSPORTS COMBINATION HEADLIGHTS, CLEAR CORNER, BUMPER, AND SIDE MARKER LIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON THE PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT. ...more details
| Recall Reason |
EXTERIOR LIGHTING |
| Recall Date |
MAY 24, 2006 |
| Model Affected |
200SX |
| Potential Units Affected |
27176 |
|
Recall Summary
CERTAIN CK MOTORSPORTS COMBINATION HEADLIGHTS, CLEAR CORNER, BUMPER, AND SIDE MARKER LIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON THE PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.
|
|
Consequence
WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING.
|
|
Remedy
CK MOTORSPORT WILL NOTIFY OWNERS AND REPLACE THE NONCOMPLIANT LAMPS FREE OF CHARGE. THE RECALL BEGAN ON JULY 1, 2006. OWNERS MAY CONTACT CK MOTORSPORT AT 1-909-610-7211.
|
|
Notes
CK MOTORSPORT, INC.
|
THE ANTI-LOCK BRAKING SYSTEM (ABS) HYDRAULIC ACTUATOR WAS NOT PROPERLY PURGED OF ALL AIR DURING THE FILL AND EVACUATION PROCESS CAUSING AIR BUBBLES TO GET INTO THE BRAKE SYSTEM. ...more details
| Recall Reason |
SERVICE BRAKES, HYDRAULIC:ANTILOCK |
| Recall Date |
MAR 01, 1995 |
| Model Affected |
200SX |
| Potential Units Affected |
950 |
|
Recall Summary
THE ANTI-LOCK BRAKING SYSTEM (ABS) HYDRAULIC ACTUATOR WAS NOT PROPERLY PURGED OF ALL AIR DURING THE FILL AND EVACUATION PROCESS CAUSING AIR BUBBLES TO GET INTO THE BRAKE SYSTEM.
|
|
Consequence
THIS CONDITION CAN CAUSE INCREASED BRAKE PEDAL TRAVEL AND STOPPING DISTANCES.
|
|
Remedy
DEALERS WILL BLEED THE ABS HYDRAULIC ACTUATOR TO REMOVE ANY AIR BUBBLES IN THE BRAKE SYSTEM.
|
|
Notes
NISSAN NORTH AMERICA, INC.
|
VEHICLE DESCRIPTION: PASSENGER VEHICLES. WATER CAN ENTER AND DISPLACE THE GREASE IN THE WIPER ARM LINKAGE BALL JOINT WHERE THE WIPER LINKAGE ATTACHES TO THE WIPER MOTOR LINKAGE. ...more details
| Recall Reason |
VISIBILITY:WINDSHIELD WIPER/WASHER:LINKAGES |
| Recall Date |
MAY 05, 1998 |
| Model Affected |
200SX |
| Potential Units Affected |
512387 |
|
Recall Summary
VEHICLE DESCRIPTION: PASSENGER VEHICLES. WATER CAN ENTER AND DISPLACE THE GREASE IN THE WIPER ARM LINKAGE BALL JOINT WHERE THE WIPER LINKAGE ATTACHES TO THE WIPER MOTOR LINKAGE.
|
|
Consequence
THIS CAN RESULT IN GRADUAL WEAR OVER A PERIOD OF TIME INSIDE THE JOINT THAT COULD LEAD TO THE SEPARATION OF THE WIPER LINKAGE ASSEMBLY FROM THE WIPER MOTOR LINKAGE AT THE BALL JOINT. A LOSS OF WINDSHIELD WIPER FUNCTION CAN RESULT IN THIS SEPARATION OCCURS.
|
|
Remedy
TO PREVENT GREASE FROM BEING WASHED OUT OF THE JOINT, THE DEALERS WILL MODIFY BY ADDING A WATER DIVERSION SEAL THAT WILL PREVENT WATER FROM ENTERING THE WINDSHIELD WIPER LINKAGE BALL JOINT AREA.
|
|
Notes
NISSAN NORTH AMERICA, INC.
|
|