|
|
QUALIS AUTOMOTIVE IS RECALLING CERTAIN AFTERMARKET BALL JOINTS SOLD FOR USE ON CERTAIN PASSENGER VEHICLES. THE SOCKET MAY HAVE BEEN EXCESSIVELY HARDENED WHICH COULD CAUSE IT TO CRACK NEAR THE RETAINING RING GROOVE ALLOWING THE BALL STUD TO SEPARATE UNDER IMPACT LOAD. THE SUBJECT BALL JOINTS WERE SOLD AS FOUR PART NUMBERS, D10945, D10946, G10945, AND G10946. THE AFFECTED CONTROL ARMS, D10945 AND D10946, ARE STAMPED WITH THE FOLLOWING DATES ON THE BALL JOINTS: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909, 110309, 113209, AND 116609. THE G10945 AND G10946 ARE THE SAME PART AS THE D10945 AND D10946 RESPECTIVELY. THEY ARE LABELED DIFFERENTLY DEPENDING ON THE AFTERMARKET CUSTOMER. ...more details
| Recall Reason |
SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT |
| Recall Date |
OCT 09, 2009 |
| Model Affected |
SEBRING |
| Potential Units Affected |
5787 |
|
Recall Summary
QUALIS AUTOMOTIVE IS RECALLING CERTAIN AFTERMARKET BALL JOINTS SOLD FOR USE ON CERTAIN PASSENGER VEHICLES. THE SOCKET MAY HAVE BEEN EXCESSIVELY HARDENED WHICH COULD CAUSE IT TO CRACK NEAR THE RETAINING RING GROOVE ALLOWING THE BALL STUD TO SEPARATE UNDER IMPACT LOAD. THE SUBJECT BALL JOINTS WERE SOLD AS FOUR PART NUMBERS, D10945, D10946, G10945, AND G10946. THE AFFECTED CONTROL ARMS, D10945 AND D10946, ARE STAMPED WITH THE FOLLOWING DATES ON THE BALL JOINTS: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909, 110309, 113209, AND 116609. THE G10945 AND G10946 ARE THE SAME PART AS THE D10945 AND D10946 RESPECTIVELY. THEY ARE LABELED DIFFERENTLY DEPENDING ON THE AFTERMARKET CUSTOMER.
|
|
Consequence
SEPARATION OF THE BALL STUD FROM THE SOCKET OF THE BALL JOINT HOUSING WOULD ALLOW THE CONTROL ARM TO COLLAPSE AND THE WHEEL TO FOLD IN CAUSING LOSS OF STEERING CONTROL, POSSIBLY RESULTING IN A CRASH.
|
|
Remedy
QUALIS AUTOMOTIVE WILL REPLACE THE BALL JOINTS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON NOVEMBER 9, 2009.
|
|
Notes
QUALIS AUTOMOTIVE LLC
|
CERTAIN CARDONE MASTER CYLINDERS WITH DATE CODES LOWER THAN DCA7078 SOLD AS REPLACEMENT EQUIPMENT FOR USE ON THE VEHICLES LISTED ABOVE. THE SEAL ON MASTER CYLINDER CAN FAIL AND LEAK BRAKE FLUID. ...more details
| Recall Reason |
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER |
| Recall Date |
MAR 29, 2007 |
| Model Affected |
SEBRING |
| Potential Units Affected |
13128 |
|
Recall Summary
CERTAIN CARDONE MASTER CYLINDERS WITH DATE CODES LOWER THAN DCA7078 SOLD AS REPLACEMENT EQUIPMENT FOR USE ON THE VEHICLES LISTED ABOVE. THE SEAL ON MASTER CYLINDER CAN FAIL AND LEAK BRAKE FLUID.
|
|
Consequence
LOSS OF BRAKE FLUID CAN RESULT IN POOR BRAKING PERFORMANCE, POSSIBLY RESULTING IN A VEHICLE CRASH.
|
|
Remedy
CARDONE WILL NOTIFY OWNERS AND OFFER TO REPURCHASE ANY DEFECTIVE MASTER CYLINDERS. THE RECALL BEGAN DURING APRIL 2007. OWNERS CAN CONTACT CARDONE AT 1-800-777-4780.
|
|
Notes
CARDONE INDUSTRIES, INC.
|
SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS. ...more details
| Recall Reason |
EXTERIOR LIGHTING |
| Recall Date |
APR 07, 2009 |
| Model Affected |
SEBRING |
| Potential Units Affected |
16270 |
|
Recall Summary
SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
|
|
Consequence
DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH.
|
|
Remedy
SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.
|
|
Notes
SABERSPORT
|
ON CERTAIN SEDANS AND CONVERTIBLE MODEL VEHICLES, THE RIGHT STEERING KNUCKLE MAY HAVE BEEN DAMAGED DURING THE COMPONENT MANUFACTURING PROCESS. ...more details
| Recall Reason |
STEERING:LINKAGES:KNUCKLE:SPINDLE:ARM |
| Recall Date |
DEC 09, 2004 |
| Model Affected |
SEBRING |
| Potential Units Affected |
26354 |
|
Recall Summary
ON CERTAIN SEDANS AND CONVERTIBLE MODEL VEHICLES, THE RIGHT STEERING KNUCKLE MAY HAVE BEEN DAMAGED DURING THE COMPONENT MANUFACTURING PROCESS.
|
|
Consequence
THIS COULD CAUSE THE STEERING KNUCKLE TO CRACK AND SEPARATE FROM THE UPPER CONTROL ARM, WHICH COULD RESULT IN A CRASH.
|
|
Remedy
DEALERS WILL INSPECT AND REPLACE THE RIGHT STEERING KNUCKLE. THE RECALL BEGAN ON DECEMBER 27, 2004. OWNERS SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
|
|
Notes
DAIMLERCHRYSLER CORPORATION D55
|
ON CERTAIN SEDANS, THE LEFT AND RIGHT REAR OUTBOARD RETRACTOR AND TURNING LOOP BOLTS ON THE SEAT BELTS MAY NOT HAVE BEEN PROPERLY TIGHTENED. ...more details
| Recall Reason |
SEAT BELTS:REAR |
| Recall Date |
NOV 02, 2004 |
| Model Affected |
SEBRING |
| Potential Units Affected |
8000 |
|
Recall Summary
ON CERTAIN SEDANS, THE LEFT AND RIGHT REAR OUTBOARD RETRACTOR AND TURNING LOOP BOLTS ON THE SEAT BELTS MAY NOT HAVE BEEN PROPERLY TIGHTENED.
|
|
Consequence
IN THE EVENT OF A CRASH, THE SEAT OCCUPANT MAY NOT BE PROPERLY RESTRAINED, INCREASING THE RISK OF INJURY.
|
|
Remedy
DEALERS WILL INSPECT AND TIGHTEN THE AFFECTED FASTENERS. THE RECALL BEGAN ON NOVEMBER 15, 2004. OWNERS SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
|
|
Notes
DAIMLERCHRYSLER CORPORATION D52
|
|