|
|
DOPE, INC. IS RECALLING 42,540 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS. ...more details
| Recall Reason |
EXTERIOR LIGHTING:HEADLIGHTS |
| Recall Date |
MAY 11, 2009 |
| Model Affected |
INTREPID |
| Potential Units Affected |
42540 |
|
Recall Summary
DOPE, INC. IS RECALLING 42,540 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
|
|
Consequence
DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH.
|
|
Remedy
DOPE, INC. WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON JULY 28, 2009. OWNERS MAY CONTACT DOPE, INC. AT 1-626-272-1798.
|
|
Notes
DOPE, INC.
|
ON CERTAIN PASSENGER VEHICLES, THE FLOOR SHIFTER IGNITION-PARK INTERLOCK MAY FAIL AND ALLOW THE SHIFTER TO BE MOVED OUT OF THE PARK POSITION WITH THE KEY REMOVED. AN INOPERATIVE INTERLOCK MAY ALSO ALLOW THE KEY TO BE REMOVED WHEN THE SHIFTER HAS NOT BEEN PLACED IN THE PARK POSITION. ...more details
| Recall Reason |
POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:FLOOR SHIFT |
| Recall Date |
JAN 13, 2004 |
| Model Affected |
INTREPID |
| Potential Units Affected |
2315768 |
|
Recall Summary
ON CERTAIN PASSENGER VEHICLES, THE FLOOR SHIFTER IGNITION-PARK INTERLOCK MAY FAIL AND ALLOW THE SHIFTER TO BE MOVED OUT OF THE PARK POSITION WITH THE KEY REMOVED. AN INOPERATIVE INTERLOCK MAY ALSO ALLOW THE KEY TO BE REMOVED WHEN THE SHIFTER HAS NOT BEEN PLACED IN THE PARK POSITION.
|
|
Consequence
EITHER CIRCUMSTANCE MAY RESULT IN THE VEHICLE ROLLING AWAY WITHOUT WARNING.
|
|
Remedy
DEALERS WILL INSTALL A NEW LOAD-LIMITING PUSH ROD INTO THE FLOOR SHIFTER LEVER OF THE AFFECTED VEHICLES. OWNER NOTIFICATION BEGAN ON JUNE 14, 2004. OWNERS SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
|
|
Notes
DAIMLERCHRYSLER CORPORATION C45
|
ON CERTAIN PASSENGER VEHICLES, SEAT BACK RECLINER BOLT BREAKAGE CAN OCCUR RESULTING IN THE SEAT BACK RECLINING UNEXPECTEDLY. ...more details
| Recall Reason |
SEATS:FRONT ASSEMBLY:RECLINER |
| Recall Date |
FEB 05, 2003 |
| Model Affected |
INTREPID |
| Potential Units Affected |
1066000 |
|
Recall Summary
ON CERTAIN PASSENGER VEHICLES, SEAT BACK RECLINER BOLT BREAKAGE CAN OCCUR RESULTING IN THE SEAT BACK RECLINING UNEXPECTEDLY.
|
|
Consequence
IF THE SEAT BACK UNEXPECTEDLY RECLINES WHILE THE CAR IS BEING DRIVEN, IT COULD RESULT IN LOSS OF VEHICLE CONTROL, INCREASING THE RISK OF A CRASH.
|
|
Remedy
DEALERS WILL REPLACE THE RECLINER BOLTS. OWNER NOTIFICATION BEGAN ON APRIL 23, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
|
|
Notes
DAIMLERCHRYSLER CORPORATION C04
|
VEHICLE DESCRIPTION: CERTAIN VAN, WAGON, PICKUP TRUCKS, PASSENGER AND SPORT UTILITY VEHICLES, FAIL TO COMPLY WITH REQUIREMENTS OF FMVSS NO. 209, "SEAT BELT ASSEMBLIES." THE FRONT SEAT BELT RETRACTOR MAY NOT COMPLY WITH THE REQUIREMENTS OF THE STANDARD. ...more details
| Recall Reason |
SEAT BELTS:FRONT:RETRACTOR |
| Recall Date |
APR 11, 2001 |
| Model Affected |
INTREPID |
| Potential Units Affected |
161682 |
|
Recall Summary
VEHICLE DESCRIPTION: CERTAIN VAN, WAGON, PICKUP TRUCKS, PASSENGER AND SPORT UTILITY VEHICLES, FAIL TO COMPLY WITH REQUIREMENTS OF FMVSS NO. 209, "SEAT BELT ASSEMBLIES." THE FRONT SEAT BELT RETRACTOR MAY NOT COMPLY WITH THE REQUIREMENTS OF THE STANDARD.
|
|
Consequence
IF THE RETRACTOR DOES NOT WORK PROPERLY, IT WILL NOT ADEQUATELY PROTECT OCCUPANTS IN THE EVENT OF A CRASH.
|
|
Remedy
DEALERS WILL REPLACE THE SEAT BELT RETRACTOR. OWNER NOTIFICATION BEGAN AUGUST 20, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
|
|
Notes
DAIMLERCHRYSLER CORPORATION 978
|
SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS. ...more details
| Recall Reason |
EXTERIOR LIGHTING |
| Recall Date |
APR 07, 2009 |
| Model Affected |
INTREPID |
| Potential Units Affected |
16270 |
|
Recall Summary
SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
|
|
Consequence
DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH.
|
|
Remedy
SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.
|
|
Notes
SABERSPORT
|
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE SEAT BELT SHOULDER HEIGHT ADJUSTABLE TURNING LOOP (ATL) TOP MOUNTING BOLT WAS INADEQUATELY MANUFACTURED. ...more details
| Recall Reason |
SEAT BELTS |
| Recall Date |
FEB 04, 2000 |
| Model Affected |
INTREPID |
| Potential Units Affected |
204000 |
|
Recall Summary
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE SEAT BELT SHOULDER HEIGHT ADJUSTABLE TURNING LOOP (ATL) TOP MOUNTING BOLT WAS INADEQUATELY MANUFACTURED.
|
|
Consequence
THE AFFECTED MOUNTING BOLTS MAY NOT WITHSTAND SUFFICIENT FORCE TO FUNCTION PROPERLY IN CERTAIN IMPACT SITUATIONS, INCREASING THE RISK OF INJURY TO A BELTED OCCUPANT.
|
|
Remedy
DEALERS WILL REPLACE THE SHOULDER BELT HEIGHT ADJUSTER MOUNTING BOLTS.
|
|
Notes
DAIMLERCHRYSLER CORPORATION 866
|
There are currently no photos available for 1999 Dodge Intrepid. Please try again later...
There are currently no videos available for 1999 Dodge Intrepid. Please try again later...
|