1980 Ford E-150 Econoline Recalls
Read 1980 Ford E-150 Econoline recall reports, with detailed explanations of the car defects, problems, and solutions from the manufacturer. Don’t wait until the worst case scenario has happened! Be sure to check the latest 1980 Ford E-150 Econoline recalls on a regular basis.
|
|
|
|
INTERCONTINENTAL AUTO PARTS IS RECALLING 1,937 FUEL FILTERS, P/NOS ALG 44/1 AND PUROLATOR F10024, SHIPPED BETWEEN JANUARY 14 AND FEBRUARY 13, 2008, SOLD FOR USE ON THE VEHICLES LISTED ABOVE. THE FILTER'S OUTLET CAP MAY NOT BE SECURELY CRIMPED TO THE HOUSING. THIS COULD RESULT IN A SEPARATION OF FILTER'S OUTLET CAP FROM THE HOUSING. ...more details
| Recall Reason |
FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP |
| Recall Date |
MAR 06, 2008 |
| Model Affected |
E SERIES |
| Potential Units Affected |
1937 |
|
Recall Summary
INTERCONTINENTAL AUTO PARTS IS RECALLING 1,937 FUEL FILTERS, P/NOS ALG 44/1 AND PUROLATOR F10024, SHIPPED BETWEEN JANUARY 14 AND FEBRUARY 13, 2008, SOLD FOR USE ON THE VEHICLES LISTED ABOVE. THE FILTER'S OUTLET CAP MAY NOT BE SECURELY CRIMPED TO THE HOUSING. THIS COULD RESULT IN A SEPARATION OF FILTER'S OUTLET CAP FROM THE HOUSING.
|
|
Consequence
IF THIS CONDITION OCCURS WHILE ATTEMPTING TO START THE VEHICLE, A NO START CONDITION MAY RESULT AND FUEL MAY BE PUMPED ONTO THE GROUND. IF THIS OCCURS WHILE THE VEHICLE IS IN MOTION, THE ENGINE MAY STOP DUE TO INADEQUATE FUEL SUPPLY. IF AN IGNITION SOURCE WERE PRESENT, FUEL LEAKAGE MAY RESULT IN A FIRE.
|
|
Remedy
INTERCONTINENTAL WILL REPLACE THE FUEL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING MARCH 2008. OWNERS MAY CONTACT INTERCONTINENTAL AT 800-451-2593.
|
|
Notes
INTERCONTINENTAL AUTO PARTS
|
CERTAIN VEHICLES WERE EQUIPPED WITH FRONT BRAKE HOSE ASSEMBLIES THAT WERE INCORRECTLY MANUFACTURED BY THE SUPPLIER. THESE ASSEMBLIES, BOTH RH AND LH, WERE INCORRECTLY BUILT WITH THE FITTINGS MISORIENTED BY 90 DEGREES. THIS COULD CAUSE CHAFING OF THE BRAKE HOSE THROUGH CONTACT WITH THE ADJACENT TIRE DURING FULL TURNS. CONTINUED CHAFING COULD RESULT IN A BRAKE FLUID LEAK. ...more details
| Recall Reason |
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS |
| Recall Date |
SEP 19, 1980 |
| Model Affected |
E150 |
| Potential Units Affected |
10000 |
|
Recall Summary
CERTAIN VEHICLES WERE EQUIPPED WITH FRONT BRAKE HOSE ASSEMBLIES THAT WERE INCORRECTLY MANUFACTURED BY THE SUPPLIER. THESE ASSEMBLIES, BOTH RH AND LH, WERE INCORRECTLY BUILT WITH THE FITTINGS MISORIENTED BY 90 DEGREES. THIS COULD CAUSE CHAFING OF THE BRAKE HOSE THROUGH CONTACT WITH THE ADJACENT TIRE DURING FULL TURNS. CONTINUED CHAFING COULD RESULT IN A BRAKE FLUID LEAK.
|
|
Consequence
|
|
Remedy
DEALER WILL INSPECT BOTH FRONT BRAKE HOSES AND, IF NECESSARY, REPLACE ONE OR BOTH HOSES AT NO CHARGE.
|
|
Notes
FORD MOTOR COMPANY
|
CERTAIN VEHICLES WERE PRODUCED WITH WHEEL ASSEMBLIES THAT MAY HAVE CRACKS NEAR THE BOLT HOLES IN THE WHEEL DISC. DURING VEHICLE USE, THE CRACKS COULD GRADUALLY INCREASE AND RESULT IN PARTIAL OR COMPLETE SEPARATION OF THE WHEEL AND TIRE ASSEMBLY FROM THE VEHICLE. ...more details
| Recall Reason |
WHEELS:CENTER SECTION |
| Recall Date |
JUN 09, 1980 |
| Model Affected |
E SERIES |
| Potential Units Affected |
12500 |
|
Recall Summary
CERTAIN VEHICLES WERE PRODUCED WITH WHEEL ASSEMBLIES THAT MAY HAVE CRACKS NEAR THE BOLT HOLES IN THE WHEEL DISC. DURING VEHICLE USE, THE CRACKS COULD GRADUALLY INCREASE AND RESULT IN PARTIAL OR COMPLETE SEPARATION OF THE WHEEL AND TIRE ASSEMBLY FROM THE VEHICLE.
|
|
Consequence
|
|
Remedy
DEALER WILL INSPECT THE WHEEL DISC DATE CODE AND REPLACE THOSE WHEELS INDICATING AN OCTOBER 18, 1979 DATE OF MANUFACTURE.
|
|
Notes
FORD MOTOR COMPANY
|
| Recall Reason |
SEAT BELTS:FRONT:ANCHORAGE |
| Recall Date |
JUL 18, 1990 |
| Model Affected |
E150 |
| Potential Units Affected |
13637 |
|
Recall Summary
|
|
Consequence
OCCUPANTS WOULD NOT BE ADEQUATELY PROTECTED IN EVENT OFAN ACCIDENT OR SUDDEN STOP.
|
|
Remedy
INSTALL PROPER MOUNTING HARDWARE AND SEAT BELTS.
|
|
Notes
MARK III INDUSTRIES, INC.
|
DUE TO COMPUTER INPUT ERROR WHICH RESULTED IN AN INCORRECT BUILD SCHEDULE, SOME VEHICLES WERE SHIPPED WITHOUT THE REQUIRED EXHAUST SYSTEM HEAT SHIELDS. WHEN THE VEHICLE IS IDLED OVER AN EXTENDED PERIOD OF TIME, A MISSING EXHAUST HEAT SHIELD MAY RESULT IN DANGEROUSLY HIGH FLOOR PAN TEMPERATURES. ...more details
| Recall Reason |
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM |
| Recall Date |
JUL 14, 1980 |
| Model Affected |
E150 |
| Potential Units Affected |
4 |
|
Recall Summary
DUE TO COMPUTER INPUT ERROR WHICH RESULTED IN AN INCORRECT BUILD SCHEDULE, SOME VEHICLES WERE SHIPPED WITHOUT THE REQUIRED EXHAUST SYSTEM HEAT SHIELDS. WHEN THE VEHICLE IS IDLED OVER AN EXTENDED PERIOD OF TIME, A MISSING EXHAUST HEAT SHIELD MAY RESULT IN DANGEROUSLY HIGH FLOOR PAN TEMPERATURES.
|
|
Consequence
|
|
Remedy
DEALER WILL INSTALL FRAME-MOUNTING HEAT SHIELDS WITHOUT CHARGE TO OWNER.
|
|
Notes
FORD MOTOR COMPANY
|
|